RaposoHUB.ca

vMotion

Enabling VMotion

by on Sep.06, 2012, under vMotion, VMware

  • Select the host that you want to enable VMotion
  • Click on Configuration, and on the left hand side there is a panel Hardware, click on Networking
  • In the Virtual Switch that you want to enable VMotion, click on Properties
  • In the vSwitch properties’ tab Ports, add a VMkernel configuration
  • After you add it, click on Edit
  • Here are the fields that are in the VMkernel Properties
    • Port Properties
    • Network Label: Use a name that is meaningful to you
    • VLAN ID (Optional): Like what it said, you might not need it. But if you do, you should know what ID you need to use.
    • VMotion: check to box to enable VMotion
    • IP Settings
      IP Address: 10.10.10.100
      Subnet Mask: 255.255.255.0
      VMkernel Default Gateway: 10.10.10.1
      Here should be a subnet just for VMotion only, since it will generate lots of traffic when VMotion is in process. And the default gateway doesn’t have to be a real one. blockquote>

 

Example of VMkernel Properties

This is what it looks like after the VMkernel has been setup in vSwitch1.

  • Do the same thing to the other host that is in same cluster (the resource pool).
  • Now VMotion has been created in the cluster. We can go ahead to test VMotion, HA, and DRS. In fact, VMotion is the foundation of HA and DRS. If VMotion is working fine, all you need for HA and DRS is the licenses. Pretty simple and straight forward.
Leave a Comment :, more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Blogroll

A few highly recommended websites...